Carrying on from last time...
First up was to get the spacers dry fitted, which as usual meant lots of drilling and placing temporary screws...
 |
| Spacers and board labeled to keep track of what went where... |
 |
| Preparing for epoxy coating and glue up... |
 |
| Coated and gluing in progress... |
That was left to cure overnight and the next day it is time for cleanup and trimming to bond the next board on.
 |
| Spacer over sized on tapered end.. |
 |
| Planed flush. |
 |
| Double checking spacers flush and square. |
 |
| Board dry fitted.... |
 |
| Taken apart, epoxy coated, and glue spread. |
 |
| Then screwed back together and squeeze out scraped off. |
Next time, the plywood sides...
No comments:
Post a Comment